Non-Plugging Emitter

When a dirty water supply like a pond or an irrigation ditch is being used, a fine screen mesh filter will clog very quickly. The non-plugging emitter may be the perfect answer. Use a coarse screen filter (30-50 mesh) to catch larger particles and the non-plugging emitter will pass the smaller particles that would typically clog any other emitter. A minimum of 15 PSI is required for these emitters to work properly. Use at the end of 1/4" tubing or installed directly into the mainline. Will emit 1 GPH at 20 PSI.

How the Non-Plugging Emitter Works:

1. Inside the emitter are 2 diaphragms with 5 small openings.
2. When particles block the diaphragm openings, pressure develops and stretches the opening.
3. The particle is forced through the opening, which then returns to its normal size.

More Drip Emitters

Recommended Products: