Figuring out your water flow has never been easier! Simply attach the hose threaded meter to your faucet and turn on the water.
Instantly you will see the digital display measuring the water usage. Run the water for exactly 1 minute and the amount shown on the
display will give you a gallons per minute (GPM) flow rate. The water meter will also connect to any garden hose or hose thread drip
products. This is a great tool to monitor your water usage from year to year.
Features:
Ability to measure gallons or liters
Automatic shut off 10 seconds after water flow stops
Clear digital display
Reset button to clear display
Specs:
Maximum water pressure rating: 80 PSI
Minimum flow rate: 0.5 GPM (30 GPH)
Accuracy: +/- 10% for flow rate larger than 0.5 GPM:
Batteries: 1 CR2032 (included)
The water meter can be used as a great tool to determine if you have a problem with your water lines. Test the flow of each of your installed systems and keep these measurements in your records for reference. When you start up your system for a new season, retest your flows and compare to your previously recorded measurements.
-If your flow is lower, you may have plugged emitters
-If your flow is higher, you may have a leak or a broken fitting
All photos are the sole property of DripWorks. Republication or redistribution of
DripWorks content is expressly prohibited without the prior written consent of DripWorks.
Contact us by email at
webmaster@dripworks.com
Emitters 
Checkout 
Call 
