Battery Timers

A very economical and reliable drip irrigation timer. One of our best sellers.
More Information

Start Times:	Up to 4 per day. Selected days of the week.
Duration:	1 minute to 11 hours 59 minutes
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 to 5.2 GPM
Batteries:	One 9 volt Alkaline (not incl.)
Warranty:	3 years (2 years Dripworks + 1 year DIG)
Mfg. Part #:	DIG 9001D
Special Features:	Easy to set programming with digital readout. Manual override, low battery indicator. Durable diaphragm valve.

This "classic" timer is now available for a limited time only.
Dripworks has stumbled upon a hidden supply and could not pass it up. We have customers that have been using the same Rainmatic timers for over 15 years.

• Easy to program with manual on/off button.
• Anti-theft lock ring.

Pressure Range:	0 to 60 PSI
Flow Rate:	up to 8 GPM
Batteries:	Four C Alkaline (not incl.)
Warranty:	1 year

Can be programmed two ways:
1) When using the standard mode, the timer will open up to 8 times per day in one minute increments.
2) When using the misting cycle, the timer will open multiple times during a specific "window of operation" (ie between 10 AM and 5 PM) in minimum 3 second increments. You set the watering duration and the interval between waterings.

A simple dial timer that is easy to set. Comes with a start delay for easily setting the first watering time.
More Information

Start Times:	Every 3, 6 or 12 hours. Every 1, 2, 3, 4, 7 or 14 days
Duration:	2, 5, 10, 15, 30, 45 minutes. 1, 3, 6 or 9 hours
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 to 5.2 GPM
Batteries:	One 9 volt Alkaline (not incl.)
Warranty:	3 years (2 years Dripworks, 1 year DIG)
Mfg. Part #:	DIG 9001EZ
Special Features:	Two dial timer. Manual start button. Start delay button for easy programming.

The Orbit Single Dial Battery Timer is a simple, easy to program battery timer. Leon says that it's the easiest battery timer he has ever programmed!
More Information

Start Times:	Daily, every other day, every third day
Duration:	2 minutes to 90 minutes
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 - 6.5 GPM
Batteries:	Two AA Alkaline batteries (not incl.)
Warranty:	6 years (2 years DripWorks, 4 years Orbit)
Mfg. Part #:	Orbit 62024
Special Features:	Manual on/off.

The Orbit Dial Battery Timer uses dials for the settings and has an LCD display. Jerry says that it's the easiest battery timer he's ever programmed! (Guess the owners don't always agree on everything...)
More Information

Start Times:	12 times per day or up to once a week
Duration:	2, 5, 10, 15, 30, 60, 90, 120 minutes
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 - 6.5 GPM
Batteries:	Three AA Alkaline batteries (not incl.)
Warranty:	6 years (2 years DripWorks, 4 years Orbit)
Mfg. Part #:	Orbit 62155
Special Features:	Manual on/off. The only dial timer with a clock display.

This high flow water timer is great for large drip irrigation systems and small farm irrigation. Works with our new Automatic Distribution Valves.
More Information

Start Times:	Up to 4 per day. Every day up to 30 days
Duration:	1 minute to 12 hours
Pressure Range:	10 to 125 PSI
Flow Rate:	0.5 to 28 GPM
Batteries:	One 9 volt Alkaline (not incl.)
Warranty:	3 years (2 years Dripworks, 1 year DIG)
Mfg. Part #:	DIG 7001
Special Features:	Easy programming with digital readout. Comes with adapters for female hose thread inlet and male hose thread outlet, or use with 3/4" fittings. Has manual override, low battery indicator, durable diaphragm valve.

This new Orbit battery water timer can control up to 4 hose-mounted valves. The unit comes with a metal 4 way splitter, a timer and 2 valves. Add up to 2 more valves as needed. This is a single program timer with the valves operating in sequence. Each valve can be programmed with its own duration. The timer comes with a wall mount but is best used on the ground with an extension hose.
More Information

Start Times:	Up to 3 per day. Every day up to 7 days
Duration:	1 minute to 99 minutes
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 to 6.5 GPM
Batteries:	Two AA Alkaline (not incl.)
Warranty:	2 year (Dripworks)
Mfg. Part #:	Orbit 91591

This new water timer is the only battery water timer that can run a drip system from a ground level water barrel. It runs a zero pressure and is rain sensor ready (see TLPRS below). Easy to set 4 button programming with digital readout. There is a manual override and a low battery indicator.

Start Times:	Up to 9 per day. Every day up to 7 days
Duration:	1 minute to 4 hours and 25 minutes
Pressure Range:	0 to 80 PSI
Flow Rate:	0.5 to 5.2 GPM @30 PSI
Batteries:	Two AA Alkaline (not incl.)
Warranty:	2 year (Dripworks)
Mfg. Part #:	GRCHI

This new Netafim battery water timer comes with a number of unique features.
More Information

• Operates at low flow of .1 GPM/6 GPH
• Operates at minimum pressure of 3 PSI, up to 150 PSI maximum
• Great for low pressure rain barrel or other gravity fed systems
• Water proof case
• Timer can be mounted separately from the valve
• Inlet/Outlet are 3/4" pipe thread
  For attaching to a hose, include the AMHMP and AFHMP parts below.

Start Times:	Up to 3 per day. Every day up to 7 days
Duration:	1 minute to 12 hours
Pressure Range:	3 to 150 PSI
Flow Rate:	0.1 to 28 GPM
Batteries:	One 9 volt Alkaline (not incl.) 2 - 1.5v LR1130 batteries (included)
Warranty:	1 year
Mfg. Part #:	Netafim AP075

Converts 3/4" female pipe connection to 3/4" female hose connection

Converts 3/4" female pipe connection to 3/4" male hose connection

The Orbit LCD Drip Irrigation Timer is the only battery timer that has a removable body for easy programming (In your favorite chair!). Operates at very low pressure.
 

Start Times:	Up to 4 per day. Every 1, 2 or 3 days
Duration:	1 minute to 6 hours
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 - 6.5 GPM
Batteries:	Two 9 volt Alkaline last a full year (not incl.)
Warranty:	6 years (2 years DripWorks, 4 years Orbit)
Mfg. Part #:	Orbit 62001
Special Features:	The body can be removed from the valve for easy access.

Finally a battery timer providing up to 4 hose mounted valves with one timer. With a low minimum flow of only 30 GPH per valve, can be used in low flow environments with sufficient pressure (5 PSI minimum).

• Comes with a brass 4 way splitter, timer and two valves.
• Add more valves as needed.
• Economical and Flexible.
• Single program timer
• Duration can be set for each valve
• Valves operate in sequence

Start Times:	Up to 3 per day. Any or all days of the week
Duration:	1 minute to 99 minutes
Pressure Range:	10 to 80 PSI
Flow Rate:	0.5 to 6.5 GPM per each valve
Batteries:	Three AA Alkaline (not incl.)
Warranty:	6 years (2 years DripWorks, 4 years Orbit)
Mfg. Part #:	Orbit 62032
Special Features:	Lower flow requirement makes this a useful timer for your multiple zone drip system.

We have long lasting, industrial grade, Energizer Alkaline batteries for your timers.

These easy to use windup timers will water from 5 to 120 minutes and then shut off automatically. They can also be locked-on to water indefinitely. The dials can be turned backwards with no damage to the mechanism. The outlet on the timer is a standard hose thread, but it comes with a plastic quick connect fitting attached that can be easily removed. No batteries are required.

Duration:	5 minutes to 120 minutes
Maximum Pressure:	80 PSI
Flow Rate:	0 to 6 GPM
Warranty:	1 year
Mfg. Part #:	YL-21001/YL-21102

This valve operates like a wind up timer.   It meters the amount of water used, then automatically shuts off.   This is the solution for situations where you want to control the amount of water used in your system.   Some customers use these for filling water tanks or swimming pools.   Has 1" MPT inlet and outlet.   Works from 7 to 90 PSI.   Easily adapted to hose threads.

• Low Flow - 1/2 to 9 GPM in 50 gallon increments up to 2,000 gallons
  Accuracy: +/- 40 gallons plus +/- 4% of actual setting
• High Flow - 2.5 to 22 GPM in 10 gallon increments up to 550 gallons
  Accuracy: +/- 11 gallons plus +/- 4% of actual setting