Oetiker Clamp Crimping Tool
Oetiker crimping clamps are becoming very popular with
landscape professionals and farmers for many reasons.
They have a more secure fit since there are no gaps
in the seal and will not loosen up over time like traditional
worm drive clamps.
They are much easier to install using the Oetiker
crimping tool, and they are less expensive.
NOTES:
These clamps are not reusable, they must be cut off to remove.
The maximum suggested pressure is around 100 PSI.
Oetiker clamps will not work on high pressure poly pipe or Layflat Tubing.
|
|
| |
Oetiker Clamps
|
|
BOSS12
|
| 10-99 | $0.48 | Each |
| 100+ | $0.345 | Each |
| |
|
BOSS34
|
| 10-99 | $0.52 | Each |
| 100+ | $0.39 | Each |
| |
|
BOSS1
|
| 10-99 | $0.55 | Each |
| 100+ | $0.42 | Each |
| |
|
BOSS114
|
| 10-99 | $0.63 | Each |
| 100+ | $0.49 | Each |
| |
|
BOSS112
|
| 10-99 | $0.67 | Each |
| 100+ | $0.52 | Each |
| |
|
BOSS2
|
| 10-99 | $0.78 | Each |
| 100+ | $0.62 | Each |
| |
|
Stainless Hose Clamps
Use these clamps with all barbed fittings as needed. They are useful for Flatube or for polytubing
when the water pressure is greater than 20 PSI.
These clamps are high quality, all stainless steel band
and gears and will last much longer than clamps with just stainless bands.
For Aquapore™ use the BSHC.
|
|
BSHC12
|
| 1-9 | $1.15 | Each |
| 10+ | $1.05 | Each |
| |
|
BSHC
|
| 1-9 | $1.15 | Each |
| 10+ | $1.05 | Each |
| |
|
BSHC1
|
| 1-9 | $1.15 | Each |
| 10+ | $1.05 | Each |
| |
|
BSHC112
|
| 1-9 | $1.25 | Each |
| 10+ | $1.15 | Each |
| |
|
BSHC2
|
| 1-9 | $1.50 | Each |
| 10+ | $1.35 | Each |
| |
|
Hose Clamp Nut Driver
This nut driver is used to easily tighten the stainless hose clamps, above.
|
|
|
BSHCDR
|
Nut Driver (Use for all clamp sizes)
|
| |
|
|
Emitters 
Checkout 
Call 
