|
Use to attach 3/4" mainline tubing to a faucet, hose end or male hose end of a filter or adapter.
|
|
| |
|
For joining 3/4" mainline tubing or to repair a slit or large hole in a mainline. A necessary repair part. Always have a few on hand.
|
|
| |
|
CRCC
|
Reducing Coupler 3/4" x 1/2"
|
| |
|
This fitting is used to end a line. The screw off cap makes it easy to flush lines.
|
|
| |
| |
|
Protect your system from dirt and bugs when it is disconnected from the water source (i.e. during winter shut down or when alternating systems with a single water feed
line). Male hose thread for female hose beginning.(CHS34, Hose Beginning)
|
|
| |
|
The most common fitting used to end a line. Simply slip over the end of the line, bend the tubing over, and slip over the end again.
|
|
| |
|
Attach to a hose or faucet where two 3/4" mainlines are needed.
|
|
| |
|
Use to branch off 3/4" mainline tubing.
|
|
| |
|
CT3412
|
3/4" x 3/4" x 1/2"
|
| |
|
To go around a corner that would otherwise kink the 3/4" mainline.
|
|
| |
|
|
|
| |
|
CX3412
|
3/4" x 3/4" x 1/2" x 1/2"
|
| |
|
Shut off any 3/4" mainline by simply turning the valve handle a quarter turn.
This is a low pressure valve and may leak above 30 PSI.
If a higher pressure is necessary, see the Green Back Valve.
|
|
| |
|
|
|
| |
|
Use this fitting with a hose shut off (HSO) and a (CHS34) as a way
to shut off an individual bed or row.
|
|
| |
Compression Adapters to PVC
To attach /34" mainline tubing to 3/4" Male Pipe Threads or 3/4" Y Filter.
|
|
| |
|
To attach 3/4" mainline tubing to 3/4" Female Pipe Threads or to a 3/4" Ball Valve.
|
|
| |
|
Glue into any 3/4" PVC slip fitting to convert it to a compression fitting.
|
|
| |
|
|
Emitters 
Checkout 
Call 
