High End Battery Timers

• Waterproof Box
• 10 PSI Minimum Pressure
• Rain Sensor Capable
• 4 Button Programming with LCD
• 4 Starts per day
• 1 minute to 12 hour Watering Durations
• 7 Day Schedule or 1 to 30 Day Intervals
• 1 - 9 Volt Alkaline Battery (not included)
• 3/4" valve can be adapted to hose threads using AFHMP and AMHMP
• Water budgeting using 5% increments
• Warranty - see above
• Mfg. Part #: 710.075(TDIG34), 710.100(TDIG1),
          710.150(TDIG112), 710.200(TDIG2)

• Totally Waterproof
• 3/4" to 2" Valves Available
• 4 Button Programming with LCD
• Up to 4 Starts per station per day
• 7 Day Schedule or 1 to 30 Day Intervals
• 1 minute to 12 hour Watering Durations
• 1- 9 Volt Alkaline Batteries (not included)
• Uses 18 gauge wire up to 50 feet from timer to valve
• Wired to operate a master valve
• Warranty - see above
• Mfg. Part #: DIG 740.000
• NOTE: These timers use the TDIGVA34/TDIGVA1/TDIGVA112/TDIGVA2 valves

• Battery or Manual Operation
• Flow Control Handle
• Works only with DIG Battery timers (2 wire)
• FPT Inlet and Outlet
• Warranty - see above
• NOTE: For use with TDIG4ST and other DIG timers that use DC valves

The new Hunter XC Hybrid will operate on 6 AA batteries or plugged into a standard wall socket. It has the same great water management control as the regular Hunter XC timer. This timer uses the 2-wire Baccara DC latching valves below (it is NOT recommended for use with DIG valves). With the global seasonal adjustment (0-150%), you can alter the amount of watering to accommodate changing weather conditions. The non-volatile memory insures against unreliable power and will retain current time, day and program information even without power.
Wire from the timer to the valve can be run up to 75 feet using Dripworks 18 gauge Direct Burial Wire. Wire can be run up to 200 feet using 14 gauge wire.

These valves work with the Hunter XC Hybrid above. Special DC latching solenoid valve. NOTE: These valves will NOT work with DIG timers.

• Waterproof Case
• Manual Control on timer or valve
• Can be used with a Dry Contact Sensor (see Rain Sensor below)
• 4 Different Watering Schedules for incredible diversity (call for specific information)
• 1 second to 12 hour Watering Durations in 1 second increments
• 1 - 9 Volt Alkaline Battery (not included)
• 24" Wire from timer to valve
• Warranty - see above
• Mfg. Part #: 710.075P(TDIGGH34), 710.100P(TDIGGH1)

• Weather Resistant
• Manual Control on Timer or Valve
• Rain Sensor Capable
• 1 Second - 12 Hour Watering Cycles in 1 Second Increments
• 4 Different Watering Schedules for Incredible Diversity
• Two 9 Volt Alkaline Batteries (not included
• 24" Wire from Timer to Valve

• Totally Waterproof
• 3/4" to 2" Valves Available
• 4 Button Programming with LCD
• Up to 4 Starts per station per day
• 7 Day Schedule or 1 to 30 Day Intervals
• 1 minute to 12 hour Watering Durations
• Two 9 Volt Alkaline Batteries (not included)
• Uses 18 gauge wire up to 10 feet from timer to valve
• Now wired to operate a master valve
• Warranty - see above
• Mfg. Part #: 560.000W(TGAL6WS)
• NOTE: These timers use the TGALV34/TGAL1/TGAL112/TGALV2 valves

• Battery or Manual Operation
• Flow Control Handle
• Works only with DIG Battery timers
• FPT Inlet and Outlet
• Warranty - see above
• NOTE: For use with TGAL6WS timers

Designed for any DC DIG (Battery) controllers with Rain Sensor ports.   Shuts down the valve when it rains.   Adjustable to the amount of rainfall.