1. EZ-FLO Hose Bib Adapter
|
|
| |
2. EZ-FLO Coupler with Ball Valve (Hose Thread)
This coupler and ball valve comes with hose thread adapters already installed. The EZ-Flo units require a minimum of 120 GPH of water flow. If you are using less than that, this unit can be used to force the water through the unit. The valve is partially closed to force the water through the unit. It may take a bit of experimentation to determine the optimal position for the valve, but once you find the 'sweet spot', you can mark it on the body of the valve with a permanent marker.
|
|
|
IEZIBVH
|
Hose Install Coupler w/valve
|
| |
3. EZ-FLO New Bib Barb
EZ-Flo New Bip Barb. New large barbs for Bib Adapters come in blue and green.
|
|
|
IEZLGTBCBU
|
(mfg# R18VB) - Blue
|
| |
|
IEZLGTBCGR
|
(mfg# R18VG) - Green
|
| |
4. EZ-FLO Conn Nut--Blue
EZ-Flo Connector Nut, Blue, Connects 1/4" black tube to cap.
|
|
| |
5. *EZ-FLO Conn Nut--Green
EZ-Flo Connector Nut, Green. Connects 1/4" clear tubing to cap.
|
|
| |
6. EZ-FLO LO PR Cap w/Nuts **(No Dip Tubes)
EZ-Flo Low Pressure Cap with Nuts, without Dip Tubes
Note that this cap has COARSE threads (about 5 threads)
|
|
| |
7. EZ-FLO HI PR Cap w/Nuts **(No Dip Tubes)
EZ-Flo High Pressure Cap with Nuts, without Dip Tubes.
Note that the IEZCAPHI cap has FINE threads (about 25 or 30 threads)
while the IEZCAPHCRS has COARSE threads (about 5 threads)
|
|
| |
|
IEZCAPHCRS
|
(mfg# CAP-HPC) Note: This cap has COARSE threads
|
| |
8. EZ-FLO Cap O-Ring
EZ-Flo Hose Cap O-Ring. For High or Low pressure caps.
|
|
| |
9. Dip Tube Set
|
|
|
IEZDIP34
|
(mfg# 3/4 GAL DIP TUBE SET)
|
| |
|
IEZDIP113
|
(mfg# 1 1/3 GAL DIP TUBE SET)
|
| |
|
IEZDIP3
|
(mfg# 3 GAL DIP TUBE SET)
|
| |
10. EZ-FLO Dip Tube Adapter
|
|
| |
11. Low Pressure Tank Replacement
Replacement tank for hose or sprinkler units.
|
|
| |
| |
| |
12. EZ-FLO Nipple Connector
EZ-Flo Nipple Connector.
Connects green and blue nuts to each other to bypass the tank.
|
|
| |
13. Vari-Flow™ Valves
A Vari-Flow&trade valve allows you to turn your EZ-FLO Injector
on or off.
|
14VFV
|
14VFV - 1/4in Barbed VariFlow Valve
14VFVT - 1/4in Threaded VariFlow Valve
|
| 5-99 | $0.62 | Each |
| 100+ | $0.56 | Each |
|
|
14. EZ-FLO 1/4" Tube Clamp
For constant pressure units
|
|
| |
15. EZ-FLO Shut Off Valve Kit
Allows you to shut off your EZ-Flo unit without turning off the water.
The unit has quick disconnects to allow you to easily disconnect the tank for refilling.
This part includes a set of two shut-off valves.
|
|
| |
16. EZ-FLO Black Tube--5 Ft
EZ-Flo 1/4" black tubing, 5 feet
|
|
| |
17. EZ-FLO Clear Tube--5 Ft
EZ-Flo 1/4" clear tubing, 5 feet
|
|
| |
18. EZ-FLO Transfer Kit
To allow you to move an EZ-Flo Hose unit from faucet to faucet
|
|
| |
19. EZ-FLO 3/4" Slip Install Coupler
EZ-Flo Install Kit, 3/4" PVC Slip Coupler with Barbs
|
|
| |
20. EZ-FLO 3/4" Threaded Install Coupler
EZ-Flo Install Kit, 3/4" PVC Threaded Coupler with Barbs
|
|
|
IEZI34THR
|
3/4in PVC Threaded Coupler
(length: 3 3/4in)
|
| |
21. EZ-FLO 3/4" Coupler with Ball Valve
|
|
|
IEZIBV34
|
3/4in w/Ball Valve, 7 1/2" long
|
| |
22. EZ-FLO 3/4" Expansion Coupler
|
|
|
IEZIEX34
|
3/4in, fits 4 1/4in opening
|
| |
23. EZ-FLO 1" Install Coupler
1" PVC Slip Coupler with barbs
|
|
| |
24. EZ-FLO 1" Thr Install Coupler
1" PVC Threaded Coupler with barbs
|
|
| |
25. EZ-FLO 1" Coupler with Ball Valve
|
|
|
IEZIBV1
|
1in w/Ball Valve, 8" long
|
| |
26. EZ-FLO 1" Expansion Coupler
|
|
|
IEZIEX1
|
1in, fits 4 3/4in opening
|
| |
27. EZ-FLO 1 1/4" Install Coupler
1 1/4" PVC Slip Coupler with barbs
|
|
| |
28. EZ-FLO 1 1/4" Coupler with Ball Valve
|
|
|
IEZIBV114
|
1 1/4in w/Ball Valve, 9 1/2" long
|
| |
29. EZ-FLO 1 1/2" Install Coupler
1 1/2" PVC Slip Coupler with barbs
|
|
| |
30. EZ-FLO 1 1/2" Coupler with Ball Valve
|
|
|
IEZIBV112
|
1 1/2in w/Ball Valve, 10 1/4in long
|
| |
31. EZ-FLO 2" Install Coupler
2" PVC Slip Coupler with Barbs
|
|
| |
32. EZ-FLO 2" Coupler with Ball Valve
|
|
|
IEZIBV2
|
2in w/Ball Valve, 11 1/2" long
|
| |
33. EZ-FLO Flow Disc Kit
Drip systems with water flow below 120 gallons per hour require an EZ-Flo Disc in order to proportion properly into the drip system. There are three discs provided in the kit that range from 7.5 to 120 gallons per hour.
|
|
|
IEZDISC
|
EZ FLO Flow Disc Kit
|
| |
34. EZ-FLO Pressure Relief Valve
|
|
|
IEZPRV
|
EZ FLO Pressure Relief Valve
|
| |
|
|
Emitters 
Checkout 
Call 
