A number of our Water4Gas customers have requested UPS expedited shipping.
You should be aware that this can be very expensive.
The chart below is meant to give you some idea of how much UPS expedited shipping
might cost. Our normal ground rates are shown for comparison.
Estimated Shipping
| Ship By |
Number
of DABs |
Weight |
Northern
California |
Denver |
New York City |
Rural North
Carolina |
|
Our normal shipping methods:
|
| USPS First Class |
up to 50 |
up to .4 oz |
$4.00 |
$4.00 |
$4.00 |
$4.00 |
| USPS Priority |
up to 200 |
up to 1 lb |
$8.00 |
$8.00 |
$8.00 |
$8.00 |
|
UPS Expedited shipping methods:
|
| UPS 3 Day |
up to 150 |
up to 1 lb |
$13.00 |
$13.00 |
$16.00 |
$19.00 |
| UPS 2 Day |
up to 150 |
up to 1 lb |
$18.00 |
$18.00 |
$24.00 |
$27.00 |
| UPS Next Day |
up to 150 |
up to 1 lb |
$29.00 |
$46.00 |
$54.00 |
$52.00 |
|
|
Adjust-A-Bubbler
Use this emitter for delivering large quantities of
water to a small area (i.e. filling a basin or moat
around a plant).
The flow varies from 0-35 GPH with a twist of the cap.
|
|
DAB
|
| 5-99 | $0.45 | Each |
| 100+ | $0.415 | Each |
| |
|
1/4" Fittings
Please note that our 1/4" parts are for 1/4" outside diameter tubing.
|
Transfer Barb
A barbed end connector for attaching micro-tubing to
mainline (1/2" or 3/4") tubing, for joining two pieces
of micro-tubing together, or for connecting 1/4" micro-tubing
to 1/4" Soaker Dripline.
The Long Transfer Barb has a long body and tapered ends.
Some people prefer this style because it is easier to handle.
Use it the same as the regular transfer barb.
This fitting is for use with .17" ID/.25" OD 1/4" poly tubing or .16" ID/.22-.245" OD vinyl tubing
|
14TB
|
| |
Elbow
Use these on decks and patios where right angles are
needed to get in and out of containers.
This fitting is for use with .17" ID/.25" OD 1/4" poly tubing or .16" ID/.22-.245" OD vinyl tubing
|
1490
|
1490
|
| 10-99 | $0.19 | Each |
| 100+ | $0.18 | Each |
| |
|
1/4" Tee
For remote branching of micro-tubing.
HINT:
It is often easier to run a single 1/4" micro-tubing
feeder line to a group of remote plants and then use 1/4"
tees and/or crosses to supply multiple emitters.
This fitting is for use with .17" ID/.25" OD 1/4" poly tubing or .16" ID/.22-.245" OD vinyl tubing
|
14T
|
14T
|
| 10-99 | $0.19 | Each |
| 100+ | $0.18 | Each |
| |
|
|
|
Emitters 
Checkout 
Call 
