Dripworks - Your knowledgeable source for quality drip irrigation The knowledgeable source for your
drip irrigation needs 		800/522-3747
Hours M-F 8:00-4:00 Pacific
 190 Sanhedrin Circle
Willits, CA 95490
Go to catalog page:
  
Shopping Cart:     Total: $
My Account               line items
Home>Store>Kits>Specialty Kits

Specialty Drip Irrigation Kits

 Catalog Page 5
Email this page to a friend
RETAIL
Related Products:
Heart Kit and add-ons
Books
Battery Timers
The kits on this page offer a complete solution to some of your drip irrigation needs. Each drip irrigation kit contains the tubing, filter, regulator, fittings and emitters (or emitter tubing) needed to complete the task.
For our Heartkit starter kit and add-ons, check out our Heart Kit page.

For each drip irrigation kit (not including sampler kits!) that you buy you can buy one battery timer at 10% off here.

 

Row Crop Kit


Designed for row crops, raised beds and intensive square foot gardening.   This drip irrigation kit uses 5/8" 15 mil high flow T-Tape with emitters spaced every 8" for even watering.   This is a beginning system that can be easily added on to.   Enough T-Tape for ten 20' rows.   Click here for more T-Tape information.

Kit includes:
  • 200 feet of T-Tape ( T1508HC x 2)
  • 1 - 100' roll of 1/2" Tubing ( 12100)
  • 1 - Easy Loc Hose Beginning ( ELFH)
  • 20 - U-Shaped Hold Downs ( SUHD)
  • 1 - Figure 8 End ( CF8)
  • 10 - T-Tape Ends ( LSGS)
  • 1 - Easy Loc Coupler ( ELC)
  • 1 - Filter (200 Mesh) ( FYHL200)
  • 1 - Pressure Regulator ( PRSG10)
  • 10 - Goof Plugs ( 14GP2)
  • 10 - T-Tape Starts ( LSB)
  • 1 - Yellow Punch ( PUY)
  • 1 - Tape Loc Coupler ( LSC)
 Row Kit
KTAPE  
$69.95 Qty:   Add to cart
Download kit instruction page
Click here to order more parts for your Row Crops

Misting Kit

Stay cool anywhere!   System includes eight 3/4 GPH Cool Breeze misters and hold-downs to attach the 1/4" tubing to any wooden surface.   This system is so simple it can be installed with only a hammer and either scissors or a knife.   Attach the hose adapter to your faucet and connect the 1/4" tubing to the barbed fittings.   Install the misters anywhere you want to!

Kit includes:
  • 1 - 50' roll of 1/4" Tubing ( 1450)
  • 1 - 200 Mesh Tee Filter ( FT200)
  • 1 - Hose Adapter x 1/4" Barb ( H14BS)
  • 20 - 1/4" Support Clamps ( S14SC)
  • 1 - 1/4" Transfer Barb ( 14TB)
  • 8 - 1/4" Tees ( 14T)
  • 3 - 1/4" Elbows ( 1490)
  • 8 - 3/4 GPH Misting Nozzles ( MND34B)
 Misting Kit
KMIST    
$24.95 Qty:   Add to cart
Download kit instruction page
Click here to order more parts for your Misting

Greenhouse Kit

A misting kit to use for propagation in a greenhouse. This kit is designed to spray 2 tables 10 feet long and 4 feet wide each. It allows you to attach the tubing and misters above the propagation table to trellis wire (not included). Misters should be spaced every 2 feet or less. Each mister comes with an anti-drip device that prevents misters from dripping after the system shuts off. The kit includes 50 feet of mainline tubing with fittings, filter, pressure regulator and 10 Tornado misters with anti-drip devices. Complete instructions included.

Kit includes:
  • 1 - Check Valve ( FAVBH)
  • 1 - Tee Filter ( FT200)
  • 1 - 40PSI Pressure Regulator ( PRSG40)
  • 1 - Female Hose Beginning ( ELFH)
  • 1 - 50' Roll of 1/2" Mainline Tubing ( 1250)
  • 10 - Misting Assemblies ( MEBARB + MEAD + MTFBPR)
  • 2 - Figure 8 Ends ( CF8)
  • 1 - Easy Loc Tee ( ELT)
  • 1 - Easy Loc Coupler ( ELC)
  • 1 - Easy Loc Elbow ( ELL)
  • 20 - Trellis Hangers ( STRE)
  • 10 - Goof Plugs ( 14GP2)
  • 1 - Key Punch ( PUKEY)
 KGRN
KGRN  
$50.00 Qty:   Add to cart
Download kit instruction page
Click here to order more parts for your Greenhouse

Sampler Kit (does not qualify for reduced price timers)

If you are wondering what will work in your garden, we offer a selection of our best selling drip emitters, misters and mini-sprinklers.   For people who have some drip supplies but want to test our products, the regular Sampler Kit is great.   For beginners, the kit with tubing is necessary.   Just hook it to your hose, punch holes, and insert the emitters.


Kit includes:
  1. Ein Dor Mini Sprinkler ( MELTB)
  2. Ein Dor Barb ( MEBARB)
  3. Mini Mister ( MM)
  4. Ceta 1GPH PC Emitter ( DC1PC)
  5. Vari-Jet™ 180 Degree ( MSVJ180)
  6. Shrubbler® ( DSHB)
  7. Mini Jet Sprayer - Black 90° ( MSBL90)
  8. Mini Jet Sprayer - Green 180° ( MSGR180)
  9. Mini Jet Sprayer - Blue 300° ( MSBU300)
  10. Woodpecker Emitter 2 GPH ( DNPC2)
  11. Tornado Mister Low Flow( MTFB)
  12. Spectrum™ Sprayer ( MSPB)
  13. Key Punch ( PUKEY)
 Sampler Kit
KSK    
$6.95 Qty:   Add to cart
KSKT   w/5ft 1/2in tubing, ELFH, CF8, SEZ13
$9.95 Qty:   Add to cart
Download kit instruction page
Click here to order more parts for your Sampling
About Us | Home | Store | Checkout  Shopping Cart | Shipping & Return Policies | Links | Site Map | Contact Us
revised 05/25/2010
Questions browsing our site?
Call us
Call 1-800-522-3747

 UPS and Credit Cards
Get Firefox! for best performance 		Rate DripWorks at the Garden Watchdog
Click here to rate DripWorks
Copyright © 2009 DripWorks, Everliner.
DripWorks, Inc.
190 Sanhedrin Circle
Willits, CA 95490
(800) 522-3747 		Twitter Facebook YouTube Flickr Social icons
All photos are the sole property of DripWorks. Republication or redistribution of
DripWorks content is expressly prohibited without the prior written consent of DripWorks.
Contact us by email at webmaster@dripworks.com