The Worm Factory®
New!

Worm composting is an incredibly efficient way to convert kitchen scraps,
junk mail and cardboard into nutrient-rich compost for your garden.
Compost made by red worms in the Worm Factory® will provide the best and
fastest results and will help your plants thrive!.
-
Odor-free operation (we have one set up right here in our office)
- Easy to assemble and manage - no tools required
- Built in worm tea collector tray and spigot for easy draining
- Houses eight to twelve thousand worms that consume 5-8 pounds of food per week
- A 3 tray system is 16" x 16" x 21"
- Made from high quality post consumer recycled plastic
- Year round production if the temperature stays between 45 and 85 degrees
- Worms can be purchased on-line.
Check out findworms.com
for a source of red worms near you
Saves Space: The compact square design gives the Worm Factory®
the smallest footprint of any worm composter and holds thte largest capacity of compost
in the smallest amount of space.
Easy to Manage: The Worm Factory® is simple to operate.
When full, each tray weighs only 12.5 pounds, making lifting and arranging trays
effortless.
The included 16 page instruction manual and all the materials makes setup fast and easy.
Odorless: When managed correctly, the Worm Factory® is virtually
odorless (did we mention that we have one set up right in our office?),
making it the perfect composter for backyard gardens, garages and porches.
|

|
| |
The Smart Pot®
New!
The Smart Pot® patented porous aeration container is the best growing container
available, much better than plastic containers and will make a large difference in
the growth of your plant.
It is made from an amazingly strong geotextile material in which a whole
garden bed can be planted.
Features:
- Better than raised beds
- Aerates the root zone
- Stops root circling
- Air-prunes the plant's root structure
- Releases heat
- Ideal for hydroponic gardening too
- Great for aquatic plants in ponds
- Perfect for fruits, vegetables, annuals and perennials
Smart Pot Sizes
| Product |
Gal. |
Diam. |
Tall |
| SMP5 |
5 |
12" |
10.5" |
| SMP10 |
10 |
16" |
12.5" |
| SMP20 |
20 |
20" |
14.5" |
| SMP30 |
30 |
24" |
16.5" |
| SMP45 |
45 |
27" |
18" |
| SMP65 |
65 |
32" |
18" |
| SMP100 |
100 |
38" |
20" |
|
|
SMP5
|
| 1-9 | $5.95 | Each |
| 10+ | $5.335 | Each |
| |
|
SMP10
|
| 1-9 | $8.95 | Each |
| 10+ | $8.055 | Each |
| |
|
SMP20
|
| 1-9 | $11.95 | Each |
| 10+ | $10.755 | Each |
| |
|
SMP30
|
| 1-9 | $14.95 | Each |
| 10+ | $13.455 | Each |
| |
|
SMP45
|
| 1-9 | $16.95 | Each |
| 10-99 | $15.255 | Each |
| 100+ | $14.40 | Each |
| |
|
SMP65
|
| 1-9 | $22.95 | Each |
| 10-99 | $20.655 | Each |
| 100+ | $18.80 | Each |
| |
|
SMP100
|
| 1-9 | $29.95 | Each |
| 10-99 | $26.955 | Each |
| 100+ | $24.90 | Each |
| |
|
Cobra Stake Drip Emitter (Antelco)
New!
The Cobra is a landscape spike dripper that delivers precise amounts of
water directly to the plant root zone.
It needs a
1/4" transfer barb (14TB)
and a length of 1/4" tubing
to connect it to your mainline tubing.
It is useful in nurseries and for root stock and landscape applications.
Features of the Cobra Stake Drip Emitter include:
- Self flushing turbulent flow emitter
- Inlet barb has built in filter
- Stake length: 5 inch
- Pressure range is 10 to 50 PSI
- Long life UV Stabilized
|
|
|
|
DCOB12 - PC Cobra stake drip 1/2GPH red
DCOB1 - PC Cobra stake drip 1GPH black
DCOB2 - PC Cobra stake drip 2GPH green
|
| 5-99 | $0.54 | Each |
| 100+ | $0.48 | Each |
|
|
Other Pressure Compensating Emitters
|
Pressure Compensating Shrubbler (Antelco)
New!
The Pressure Compensating Shrubbler has a gentle flow action
with uniform coverage for all emitters on the same supply tubing line.
Although these are pressure compensating, there is some variation
due to pressure, see the chart below.
Features of the Cobra Stake Drip Emitter include:
- Non-adjustable flow rate
- Take apart for easy cleaning
- Colored cap for identification
- Pressure range is 10 to 50 PSI
- Long life UV stabilized
PC Shrubbler Diameters
| PSI |
GPH |
Diameter |
| 15 |
6.6 |
7 inches |
| 20 |
7.5 |
8 inches |
| 30 |
8.1 |
12 inches |
| 40 |
9.3 |
14 inches |
|
 DSHPCB
|
|
|
DSHPCB
|
| 5-99 | $0.44 | Each |
| 100+ | $0.39 | Each |
| |
|
DSHPCS
|
| 5-99 | $0.85 | Each |
| 100+ | $0.78 | Each |
| |
|
Other Pressure Compensating Emitters
|
Pinch Drip Drip Emitters (Antelco)
New!
The Pinch Drip emitter lays flat on the mainline tubing so that
it's not easily damaged.
They are designed for easy "finger or thumb installation".
The emitters have a 1/4" barbed inlet and a 1/4" nipple outlet.
They can be used in containers, on patios and in landscapes.
Features of the Pinch Drip Emitters include:
- Self flushing turbulent flow emitter
- Inlet barb has built in filter
- Pressure range is 10 to 50 PSI
- Long life UV Stabilized
|
|
|
|
DPCH12 - PC Pinch Drip emitter 1/2GPH red
DPCH1 - PC Pinch Drip emitter 1GPH black
|
| 10-99 | $0.26 | Each |
| 100+ | $0.234 | Each |
|
|
Other Pressure Compensating Emitters
|
CETA PC Emitters (Antelco)
New!
The CETA PC Emitters are take apart style, pressure compensating
emitters.
They come apart for easy cleaning.
These emitters can be used in a variety of applications from
containers to landscapes.
They are available in 3 flows.
The inline stakes (1 GPH version) are available in either inline or
end of line styles.
They have 1/4" barbs on the inlet and outlets.
All of these emitters operate in a pressure range of
10 to 50 PSI.
|
DC2PC
|
DC12PC - CETA PC 1/2GPH red
DC1PC - CETA PC 1GPH black
DC2PC - CETA PC 2GPH green
|
| 10-99 | $0.34 | Each |
| 100+ | $0.32 | Each |
|
|
DCIL - PC Emitter Inline on stake
DCSTK - PC Emitter End on stake
|
| 10-99 | $0.62 | Each |
| 100+ | $0.56 | Each |
|
|
Other Pressure Compensating Emitters
|
Netafim Aqua Pro Battery Timer
New!
This new Netafim battery timer comes with a number of unique features:
- Operates at low flow of .1 GPM/6 GPH
- Operates at minimum pressure of 3 PSI, up to 150 PSI maximum
- Great for low pressure
rain barrel or other gravity fed systems
- Water proof case
- Timer can be mounted separately from the valve
- Inlet/Outlet are 3/4" pipe thread
For attaching to a hose, include the AMHMP and AFHMP parts below.
| Start Times: |
Up to 3 per day. Every day up to 7 days |
| Duration: |
1 minute to 12 hours |
| Pressure Range: |
3 to 150 PSI |
| Flow Rate: |
0.1 to 28 GPM |
| Batteries: |
One 9 volt Alkaline (not incl.)
2 - 1.5v LR1130 batteries (included) |
| Warranty: |
1 year |
|
|
| |
|
Other Battery Timers
|
ORBIT Dial Battery Timer
New!
The Orbit Dial Battery Timer uses dials for the settings and has an LCD display.
Jerry says that it's the easiest battery timer he's ever programmed!
| Start Times: |
12 times per day or up to once a week |
| Duration: |
2, 5, 10, 15, 30, 60, 90, 120 minutes |
| Pressure Range: |
10 to 80 PSI |
| Flow Rate: |
0.5 - 6.5 GPM |
| Batteries: |
Three AA Alkaline batteries (not incl.) |
| Warranty: |
6 years (2 years DripWorks, 4 years Orbit) |
| Special Features: |
Manual on/off. The only dial timer with a clock display. |
|
|
| |
|
Other Battery Timers
|
ORBIT Single Dial Battery Timer
New!
The Orbit Single Dial Battery Timer is a simple, easy to program battery timer.
Leon says that it's the easiest battery timer he has ever programmed!
(Guess our owners don't always agree on everything...)
| Start Times: |
Daily, every other day, every third day |
| Duration: |
2 minutes to 90 minutes |
| Pressure Range: |
10 to 80 PSI |
| Flow Rate: |
0.5 - 6.5 GPM |
| Batteries: |
Two AA Alkaline batteries (not incl.) |
| Warranty: |
6 years (2 years DripWorks, 4 years Orbit) |
| Special Features: |
Manual on/off. |
|
|
| |
|
|
Other Battery Timers
|
Orbit Touch Screen Controller
NEW!
The Orbit Touch Screen Controller comes with touch screen technology
that makes it easy to navigate and program
| Stations: |
6 or 12 |
| Programs: |
2 (A, B) |
| Daily Start Times: |
10 per day |
| Schedule: |
Days of the week, Watering Intervals, Odd/Even days |
| Skip Intervals: |
1-28 Days |
| Run Time: |
1 minute to 99 minutes |
| Battery Backup: |
Battery time & date, Non-volatile memory |
| Pumpstart: |
Yes |
| Valve Delay: |
No |
| Rain Sensor Port: |
Yes |
| USB Port: |
Yes |
| Warranty: |
7 years |
| Special Features: |
Bright illuminated display |
| |
Docking cradle simplifies wiring installation |
| |
Rain delay |
| |
Water budgeting |
| |
Works with all 24V sprinkler systems |
| |
Smart Scan Diagnostics |
|
|
| |
|
TOTS12
|
Temporarily out of stock
|
| |
|
|
Other Electric Timers
|
DIG LEIT Solar Powered Controller
NEW!
The DIG LEIT Controller is powered by a photovoltaic module that uses ambient
light to generate the power needed for this controller.
Once the Leit-2 controller is installed, there is no further reason to visit
the controller because all programming, testing and operations are conducted
using the handset.
For a usable system you will need:
- A remote handset which can program up to 99 controllers (up to 198 valves)
with line of sight distance up to 350 feet (TLESET)
- 1 controller for every 2 valves (TLE2)
- (optional) 1 valve box mount (TLEVBM)
- DIG 2 wire valves (such as the
3/4" DIG Valve
| Stations: |
2 |
| Programs: |
2 (A, B) |
| Daily Start Times: |
4 per Program |
| Duration: |
1 minute to 5:59 hours, in 1 minute increments |
| Weekly Schedule: |
Days of the week, odd/even days |
| Watering Intervals: |
1 to 30 days |
| Battery Backup: |
time and date, Non-volatile memory |
| Pumpstart: |
No |
| Valve Delay: |
No |
| Rain Sensor Port: |
No |
| Warranty: |
3 years |
|
|
| |
| |
| |
|
|
Other Electric Timers
|
Weathermatic SmartLine® Timer
New!
The Weathermatic SmartLine® timer is a feature rich controller
that can help you save water and money.
It comes with 4 stations but you can add up to 4 more with reasonably priced
2 station modules.
There is also an optional on-site weather station available to provide
the ultimate in weather-based irrigation control with the timer's Auto Adjust mode.
Among the special features that this timer provides are:
- Real-time clock/calendar
- Non-volatile program memory. No batteries!
- Set 'no water' days for local water restrictions
- Seasonal % adjust by month
- Runoff eliminator
- Master valve control by zone
- Large LCD display
...and more...
| Stations: |
4 Base, up to 4 add-on |
| Programs: |
4 |
| Daily Start Times: |
8 per Program |
| Schedule: |
Custom days of the week, Odd or Even days |
| Skip Intervals: |
1-28 Days |
| Run Time: |
1 minute to 9 hours 55 minutes |
| Battery Backup: |
non-volatile memory, no battery needed |
| Pumpstart: |
Yes |
| Valve Delay: |
Yes |
| Rain Sensor Port: |
No, wire directly into common |
| Warranty: |
2 years |
|
4 Station Base unit
2 Station Module
|
|
TWM48
|
4 Station indoor Base unit
|
| |
|
The 2 Station module allows you to add two more stations
to your SmartLine controller.
These are "hot-swap" modules which means you can replace
them without powering down the controller.
You can add up to two of these modules to your controller
to give you a maximum of 8 stations.
|
| |
|
Adding the Weather Station opens up the full functionality
of the SmartLine controller.
It can save 20 to 50% on annual water usage by automatically
adjusting watering times for each zone 365 days a year
(and 366 days in a leap year!) using on-site, real time weather data.
The Auto Adjust feature of the controller uses the data
from the Weather Station to set the run times for the valves.
You can also set up a rain shut-off at from 1/8" to 1".
The unit has a freeze sensor that will shut down the system
when the temperature reaches 37° to automatically protect the system
from freezing.
|
Weather Station
|
| |
Mixrite 45 GPM Injector
New!
This fertilizer injector is great for applications requiring a
high rate of fertilizer injection.
- Water driven piston, non-electric
- Solution is added as water flows through unit for accurate mixing
- Ratio of additive remains constant
(.2 to 2% for IMRTF102, .3 to 2.5% for IMRTF152)
- Flow range of 2 to 45 GPM
- Minimum pressure is 14.7 PSI
- Maximum pressure is 120 PSI
- 1 1/2" MPT inlet and outlet
|
|
| |
| |
Other Mixrite Fertilizer Injectors
|
|
|