Punches

The possibilities with the Pocket Punch are endless! This easy to use, all in one tool is a must have for every backyard gardener and landscaper. The innovative crescent shaped design cradles your tubing while you punch and the ergonomic finger grips make it one of the most comfortable and easy to use manual punches on the market. This punch has a long lasting stainless steel punch pin and will punch a clean hole for 1/8" or 1/4" fittings.

• Hole Punch will punch holes for 1/4" fittings or emitters into 1/2" mainline tubing.
• Insert tool saves fingers and makes short transfer barbs and most emitters with outlet nipples much easier to install.
• Emitter Removal Tool will quickly remove emitters from tubing with ease.

More Information

Replacement tip for PUPKT

The Punch N' Cut is the most versatile tool available and is a favorite among landscapers and commercial growers. This lightweight all-purpose tool is a necessary alternative to those frustrating days of keeping track of multiple tools! The Punch N' Cut tool has 3 major uses:

• Hole Punch will punch a hole for 1/4" fittings or emitters into 1/2" or larger drip tubing and flatube.
• Insert tool will hold a transfer barb or certain emitters to make installation easier.
• Cutting tool will cut mainline tubing amazingly smooth and easy, and with a little effort will cut PVC Schedule 40 up to 1 inch.

More Information

Replacement tip for PUPCUT

This punch works like a staple gun.   Slip the 1/2" or 3/4" tubing completely into the channel and squeeze the handle until you hear the pop.   It punches clean holes quickly and easily!   This punch can make a big job much easier and is quite popular with landscapers and commercial growers.

This aluminum punch is really quick and easy to use. It is long-lived and the end of it can be used to push larger emitters, such as Woodpeckers, into the tubing.

One of the best manual punches available.   It is comfortable to use and makes a clean hole.   Use for 1/4" fittings and Tape Loc fittings.   The other end has a nut driver for inserting Mini-Jets.   This punch can be sharpened with a grinding wheel.

This is a good manual punch with a comfortable, ergonomic handle. It is easy to use and makes a clean hole.   Use for 1/4" fittings and Tape Loc fittings.   This punch has a hardened steel tip and can be sharpened with a grinding wheel.

Made for 1/8" fittings and has a long lasting metal tip.   HINT: Paint this a bright color, the wood is nice but much too easy to lose in the garden.

This is our best punch for making large holes for inserting Katif emitters.   It has a socket on the other end to hold Katif emitters for easy insertion.

This punch is designed to be used only with the Take Apart Emitters. Makes insertion much easier!

A low price punch with a plastic spike.   For limited use on smaller systems.

This insert tool helps you easily put 1/4" Transfer Barbs (14TB) or 1/4" Goof Plugs (14GP2) into 1/4" tubing or 1/4" Soaker Dripline. It saves time and sore hands! (Note that this is not a punch.)

This is a newer, lower cost version of our PU400. It is a punch for the higher flow .400 barbs and it is an insert tool for the commercial tape beginning (LSB400). The punch tip is hardened steel, amazingly sharp and is molded into a solid plastic handle. It comes with a plastic cover to protect both the tip and the user. To use it as an insert tool just slide the LSB400 over the shaft and push the tool into the mainline tubing (3/4" or larger). Give the tool a slight twist and it will punch a hole and insert the LSB400 at the same time. Once the barb is seated in the main line, just remove the tool and move on to the next row. It takes less than 10 seconds per insertion.

More Information

Easy to use tubing cutter makes a nice clean cut on tubing up to 1 inch in diameter. You can use this tool to cut mainline tubing or 1/2" emitter tubing. Never have to look for your pruners or scissors again!