Clip Stake
This plastic stake has a clip to securely hold either
Rigid Risers or 1/4" tubing.
|
|
S13
|
| 5-99 | $0.48 | Each |
| 100+ | $0.426 | Each |
| |
|
S17
|
| 5-99 | $0.60 | Each |
| 100+ | $0.55 | Each |
| |
|
Straight Stake
The main body of this stake has a groove which will hold
either our 1/4" polyethylene tubing or Rigid Risers
(will not work with our 1/4" vinyl tubing).
This design makes the stake less visible and
thus more attractive in flower and show gardens.
|
|
SA8
|
| 5-99 | $0.39 | Each |
| 100+ | $0.35 | Each |
| |
|
SA12
|
| 5-99 | $0.54 | Each |
| 100+ | $0.49 | Each |
| |
|
SA16
|
| 5-99 | $0.94 | Each |
| 100+ | $0.92 | Each |
| |
|
SA21
|
| 5-99 | $1.05 | Each |
| 100+ | $0.95 | Each |
| |
|
EZ Stake
A complete stake assembly.
Fast and easy to use.
Includes 3 feet of heavy walled vinyl tubing with
a transfer barb inserted, attached to a Clip Stake.
All you need is the sprayer or mister!
|
|
SEZ13
|
| 5-99 | $1.05 | Each |
| 100+ | $0.88 | Each |
| |
|
SEZ17
|
| 5-99 | $1.25 | Each |
| 100+ | $1.05 | Each |
| |
|
Plastic Hold Down Stake For 1/4" Tubing
This 5 1/2" plastic stake is designed to replace the SS4 for holding 1/4" tubing. It is longer, more sturdy and only a few cents more. Flat top can be hammered into the ground. It is stronger and less expensive than the SS6.
|
|
SD5
|
| 1-9 | $0.22 | Each |
| 10-99 | $0.18 | Each |
| 100+ | $0.145 | Each |
| |
|
Support Stake 6" for 1/4" tubing
This 6" stake will work for 1/4" and 1/8" tubing
and is more solid than the 4" stake.
|
|
SS6
|
| 10-99 | $0.195 | Each |
| 100+ | $0.158 | Each |
| |
|
Valve Stake
This 7" stake has a control valve to easily adjust the
flow and distance of spray from a Mini Jet sprayer
or any other sprayer.
The threaded top accepts a short length of
1/4" tubing or Rigid Riser between the stake and the sprayer.
Barb on the side accepts 1/4" tubing from the mainline.
The 2003 model will have a stabilizing top
like the elbow stake shown below.
|
|
SV
|
| 5-99 | $0.56 | Each |
| 100+ | $0.49 | Each |
| |
|
Elbow Stake - 5"
A self supporting base for Rigid Risers.
Barb on the side accepts 1/4" tubing from mainline.
Top threads into Rigid Riser or regular
1/4" tubing to give extra height to any mini sprinkler or sprayer.
|
|
SELB
|
| 5-99 | $0.27 | Each |
| 100+ | $0.23 | Each |
| |
|
Rigid Riser
A stiff thick-walled 1/4" tube used when you want to
insert sprayers or mini sprinklers into a mainline but
need extra height.
To support these, use a stabilizer stake (SS14).
Rigid Risers also will pop into clip or straight
stakes for adding height.
They are low in cost and can be cut with scissors
or a knife.
Use threaded fittings and threaded base sprayer.
|
|
SR12
|
| 5-99 | $0.17 | Each |
| 100+ | $0.145 | Each |
| |
|
SR18
|
| 5-99 | $0.26 | Each |
| 100+ | $0.245 | Each |
| |
|
Stabilizer Stake
Use this to support Rigid Risers when inserting them
directly into mainline tubing.
Metal with loop at top.
See photo above.
|
|
SS14
|
| 5-99 | $0.48 | Each |
| 100+ | $0.425 | Each |
| |
|
Support Clamps with Nails
These are plastic clamps with stainless steel nails
for attaching 1/4" tubing or mainline tubing to wood surfaces.
|
|
S14SC
|
| 10-99 | $0.155 | Each |
| 100+ | $0.13 | Each |
| |
|
S12SC
|
| 10-99 | $0.295 | Each |
| 100+ | $0.27 | Each |
| |
|
Emitters 
Checkout 
Call 
