Mainline Polyethylene Tubing
½" Mainline Poly Tubing
(.600 ID .700 OD)
Our most common size irrigation tubing for most drip systems.
Maximum flow rate is approximately 240 Gallons Per Hour (GPH).
|
|
| |
| |
| |
| |
For 12500 or 121000 rolls, if you are
NOT shipping to the following states:
AZ, CA, CO, ID, MT, NM,
NV, OR, UT, WA, WY
|
Due to a change in the way UPS charges for shipping,
an additional $8 charge per roll will be added to these rolls of tubing
that are shipped east of Colorado. The charge will be shown in the shopping cart
after you enter your state and update the screen.
|
|
3/4" Mainline Poly Tubing
(.830 ID .940 OD)
This drip irrigation tubing is primarily used for bigger applications. Maximum flow rate is approximately 480 Gallons Per Hour (GPH).
|
|
| |
| |
| |
| |
For 34250 or 34500 rolls, if you are
NOT shipping to the following states:
AZ, CA, CO, ID, MT, NM,
NV, OR, UT, WA, WY
|
Due to a change in the way UPS charges for shipping,
an additional $8 charge per roll will be added to these rolls of tubing
that are shipped east of Colorado. The charge will be shown in the shopping cart
after you enter your state and update the screen.
|
|
Poly Tubing Cutter
Easy to use tubing cutter makes a nice clean cut on drip tubing up to
1 inch in diameter. You can use this tool to cut mainline irrigation tubing
or ½" emitter tubing. Never have to look for your pruners or scissors again!
|
|
| |
.400 Barb Goof Plug
A large goof plug to repair a hole in mainline tubing made for a high flow barb.
|
|
| |
1/4" and 1/8" Micro Drip Tubing
¼" Polyethylene Micro Tubing
(.170 ID .250 OD)
This is the standard ¼" micro tubing used with most
drip emitters, mini-sprinklers and sprayers.
It is NOT ¼" diameter inside the tubing.
|
|
| |
| |
| |
| |
1/4" White Poly Micro Tubing
(.170 ID .245 OD)
Perfect drip tubing to use with light colored trim or posts.
|
|
| |
1/4" Vinyl Micro Tubing
(.160 ID .220 OD)
Vinyl tubing is much softer and more flexible than polyethylene tubing.
Do not use at high pressure (over 40 PSI.)
|
|
| |
| |
1/8" Polyethylene Micro Tubing
(.125 ID .187 OD)
|
|
|
18100
|
100 feet micro-tubing
|
| |
|
18500
|
500 feet micro-tubing
|
| |
| |