Trimmers and Edgers Best Practices

Are you having a hard time trying to get stubborn weeds out of your lawn despite using chemicals and putting in some extra work? Perhaps you are using the wrong approach to the whole weed issue. I guess it is time you changes the tool for weed removal. The right tool to consider in such an instance when everything else isn’t working is a string trimmer. These tools are handy for trimming weeds, grass and small bushes.

This machine works by utilizing a nylon thread spinning at very high speeds. The thread is strong enough to cut through even the toughest weeds and shrubs. The machine is light in weight, allowing you to use it for hours on end without feeling tired, a problem you would have experienced when using heavier trimmers. To get the best out of this tool however, you need to follow some best practices.

Have the Right Machine

As with any type of equipment or tool, you are faced with a variety of choices in terms of the brand, size, engine capacity, weight and cost. If you can afford it, opt for a professional trimmer that has a minimum engine capacity of 20cc and a 2-cycle displacement engine. This type handles any residential lawn grass and will still serve you efficiently if you decide to move to a bigger home. You can even contract it out for weekend grass cutting to make some money on the side. Trimmers and Edgers stock a wide variety of these machines and you definitely get what you need from them. Check them out!

Now that you are armed with a heavy-duty, well-manufactured, reliable trimmer, let us look at some of the ways to maximize its usefulness and make it serve you longer.

Read the User Manual

Read the manual that accompanies the machine and understand its operation to the fullest. Don’t dispose of the manual after this; instead keep it in an accessible place that you can refer to at any time. Know the type of gasoline to use and the gas/oil ratio required for smooth operation, the maintenance issues that might arise and how you need to tackle them, etc.

Clean/Change the Spark Plugs and Filter Often

This is one of the easiest things to do to keep this trimmer working perfectly. Make sure you remove the spark plug and clean it regularly. As the fuel burns, the spark plug accumulates carbon deposits that lead to loss of power and poor ignition. When replacing the plug, make sure you buy the right one as indicated in the user manual.

You also need to pay some attention to the filter as well. It is usually a spongy material located in the intake mechanism. This component gets dirty regularly from the fine grass and dirt particles that you produce when trimming. Don’t forget to remove the sponge periodically to clean and oil it as per the directive in the user manual. Re-insert it in the required position properly before use.

Only Use it in Perfect Weather

Make sure you use the trimmer when the weather is ideal. Using this machine in the rain is entirely possible, but it will lead to issues with the trimmer. The trimmer will take in water which can damage some of the delicate parts. Apart from damage to your machine, the trimmer will sling wet weeds and grass on to your concrete pathways and create a hard-to-clean mess.

Proper Storage

When not in use, store the trimmer in a secure place away from the reach of children. If you are storing the trimmer for long, let’s say during the winter months; make sure to drain the fuel from the tank. Long-standing fuel solidifies and will make it hard for the fuel to flow next time you need to use the trimmer.


Using trimmers makes weed management an easy and effortless task for you. However, to make this task much easier, you need to have the right trimmer for the job. Armed with this, you need to master the user manual so that you know some aspects of maintenance and how to perform some tasks. Don’t forget to pay some attention to the spark plug and filter, which can affect the performance of the trimmer. Finally, always store the machine safely for future use.